PB Bond-240 HDU Adhesive is an amber colored, one part, urethane adhesive that works well for indoor or outdoor applications. It cures from a liquid to a solid state with a slight amount of moisture. Use it to join Precision Board High Density Urethane sheets with butt bonds to make them longer or wider, and for laminating sheets together to make them thicker. The consistency of PB Bond-240 HDU Adhesive is similar to honey, making it easy to apply directly from the container. No mixing is required. Cure time: 4 hours before moving, full strength in 12 hours.

Quick tips for using PB Bond 240

• Lightly spray or wipe mating pieces with water just prior to application
• Apply just enough PB Bond-240 HDU Adhesive to change the color of Precision Board
• Allow PB Bond to slightly bubble and thicken before pushing pieces together
• Allow minimum 4 hours cure prior to moving bonded part. Full strength in 12 hours
• Keep glue line as thin as possible for ease of sandblasting. Clamping is necessary
• To blend joint into background after sanding, prime both joint and background with FSC-88 WB primer/filler
• Drill a small hole in cap to act as dispensing nozzle. After using, cover hole with tape