BASIC USES

• Non-porous surfaces and urethane sealants
• A low-VOC, waterbased, quick-drying, one-part primer
• TREMprime Non-Porous Primer is not a film-forming primer
• It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics
• Apply with a clean cloth
• Remove all excess primer from cloth to ensure a very thin layer is applied
• Dry time is 15 min at 70 °F (21˚C)
• Primer must be completely dry before applying sealant or coating
• Urethane sealants and coatings can be applied up to 8 hr after primer has been applied
• After 8 hr, the surface must be cleaned with a Tremco approved solvent and reprimed with TREMprime Non-
• Porous Primer